Navigation: Engineering:   1 2 3 4 5 6 7 8

ELASTO – 2D/RS Structural Program by Integrated Engineering Software
Used to analyze stress and strain of mechanical components and systems, ELASTO’s calculations include displacement and stress field values.
http://www.integratedsoft.com

KELVIN – 2D/RS Thermal Program by Integrated Engineering Software
Used for applications such as cooling fins, heat sinks, chip packaging, and motor cooling, KELVIN also provides coupled analysis with OERSTED, IES’ 2D/RS eddy current field solver.
http://www.integratedsoft.com

CELSIUS – 3D Thermal Program by Integrated Engineering Software
Used for applications such as cooling fins, heat sinks, chip packaging, and motor cooling, coupled analysis is obtained with CELSIUS by using the electromagnetic power loss or force output as input for thermal analysis.
http://www.integratedsoft.com

OERSTED – 2D/RS Eddy Current Field Solver by Integrated Engineering Software
Used for applications such as induction motors, recording heads, non-destructive testing, charging fixtures and transformers, OERSTED’s calculations include force, torque, flux linkage, induced voltage, power, impedance and skin effects.
http://www.integratedsoft.com
SINGULA – 3D Full Wave Electromagnetic Simulator by Integrated Engineering Software
Used for high frequency applications such as antennas, EMC/EMI problems, microstrip power dividers and filters, power bus structures, waveguide filters and transitions, scattering from dielectric bodies and conductors. SINGULA’s calculations include near and far field results, specific absorption ratio (SAR) and electric and magnetic current density.
http://www.integratedsoft.com

LORENTZ – 2D/RS & 3D Particle Trajectory Analysis by Integrated Engineering Software
Used for applications such as ion mobility spectroscopy (IMS), photomultiplier tubes, paint sprayers, inhalers, smoke detectors, electron guns, microchannel plates and X-ray tubes, LORENTZ’s calculations include full secondary emissions, emittance, spot size and radius.
http://www.integratedsoft.com

FARADAY – 3D Eddy Current Field Solver by Integrated Engineering Software
Used for applications such as induction motors, recording heads, non-destructive testing, charging fixtures, transformers and pacemakers, FARADAY’s calculations include force, torque, flux linkage, induced voltage, power, impedance and skin effects.
http://www.integratedsoft.com

AMPERES – 3D Magnetic Field Solver by Integrated Engineering Software
Used for applications such as clutches, solenoids, motors, sensors, actuators, loudspeakers, transformers, magnetic shielding, circuit breakers and fuel injectors, AMPERES’ calculations include force, torque, flux linkage and inductance.
http://www.integratedsoft.com
MAGNETO – 2D/RS Magnetic Field Solver by Integrated Engineering Software
Used for applications such as clutches, solenoids, motors, sensors, actuators, loudspeakers, transformers, magnetic shielding, circuit breakers and fuel injectors, MAGNETO’s calculations include force, torque, flux linkage and inductance.
http://www.integratedsoft.com

COULOMB - 3D Electric Field Solver by Integrated Engineering Software
Used for applications such as high voltage shielding, cables, transformers, insulators and bushings, transmission lines, lightning arrestors and printed circuit boards, COULOMB’s calculations include electric field strength, transmission line parameters and capacitance.
http://www.integratedsoft.com