Disclaimer |
|
HTML |
Finite Element Analysis (FEA) and Design Analysis Software
|
|
|
Navigation:
Engineering: 1
2
3
4
5
6
7
8
|
ELASTO – 2D/RS Structural Program by
Integrated Engineering Software
Used to analyze stress and strain of mechanical components and systems, ELASTO’s
calculations include displacement and stress field values.
http://www.integratedsoft.com
|
KELVIN – 2D/RS Thermal Program by Integrated Engineering Software
Used for applications such as cooling fins, heat sinks, chip packaging, and motor
cooling, KELVIN also provides coupled analysis with OERSTED, IES’ 2D/RS eddy current
field solver. http://www.integratedsoft.com
|
KELVIN – 2D/RS Thermal Program by Integrated Engineering Software
Used for applications such as cooling fins, heat sinks, chip packaging, and motor
cooling, coupled analysis is obtained with CELSIUS by using the electromagnetic
power loss or force output as input for thermal analysis.
http://www.integratedsoft.com
|
CELSIUS – 3D Thermal Program by
Integrated Engineering Software
Used for applications such as cooling fins, heat sinks, chip packaging, and motor
cooling, coupled analysis is obtained with CELSIUS by using the electromagnetic
power loss or force output as input for thermal analysis.
http://www.integratedsoft.com
|
OERSTED – 2D/RS Eddy Current Field Solver
by Integrated Engineering Software
Used for applications such as induction motors, recording heads, non-destructive
testing, charging fixtures and transformers, OERSTED’s calculations include force,
torque, flux linkage, induced voltage, power, impedance and skin effects.
http://www.integratedsoft.com
|
SINGULA – 3D Full Wave Electromagnetic
Simulator by Integrated Engineering SoftwareUsed
for high frequency applications such as antennas, EMC/EMI problems, microstrip power
dividers and filters, power bus structures, waveguide filters and transitions, scattering
from dielectric bodies and conductors. SINGULA’s calculations include near and far
field results, specific absorption ratio (SAR) and electric and magnetic current
density.
http://www.integratedsoft.com
|
LORENTZ – 2D/RS & 3D Particle Trajectory
Analysis by Integrated Engineering Software
Used for applications such as ion mobility spectroscopy (IMS), photomultiplier tubes,
paint sprayers, inhalers, smoke detectors, electron guns, microchannel plates and
X-ray tubes, LORENTZ’s calculations include full secondary emissions, emittance,
spot size and radius.
http://www.integratedsoft.com
|
FARADAY – 3D Eddy Current Field Solver
by Integrated Engineering Software
Used for applications such as induction motors, recording heads, non-destructive
testing, charging fixtures, transformers and pacemakers, FARADAY’s calculations
include force, torque, flux linkage, induced voltage, power, impedance and skin
effects.
http://www.integratedsoft.com
|
AMPERES – 3D Magnetic Field Solver
by Integrated Engineering Software
Used for applications such as clutches, solenoids, motors, sensors, actuators, loudspeakers,
transformers, magnetic shielding, circuit breakers and fuel injectors, AMPERES’
calculations include force, torque, flux linkage and inductance. http://www.integratedsoft.com
|
MAGNETO – 2D/RS Magnetic Field Solver
by Integrated Engineering Software
Used for applications such as clutches, solenoids, motors, sensors, actuators, loudspeakers,
transformers, magnetic shielding, circuit breakers and fuel injectors, MAGNETO’s
calculations include force, torque, flux linkage and inductance. http://www.integratedsoft.com
|
COULOMB - 3D Electric Field Solver by
Integrated Engineering Software
Used for applications such as high voltage shielding, cables, transformers, insulators
and bushings, transmission lines, lightning arrestors and printed circuit boards,
COULOMB’s calculations include electric field strength, transmission line parameters
and capacitance. http://www.integratedsoft.com
|
Navigation:
Engineering: 1
2
3
4
5
6
7
8
|
Cad Viewing Markup and Utilities | Computer
Aided Design | Electrical
Engineering | Finite
Element Analysis (FEA) | Fluid
Dynamics and Handling | Mechanical
Engineering | Optics
and Illumination | Product
Lifecycle Management | Quality
Assurance and ISO | Simulators
and Modeling | Tool
Calibration and Control
|
|
|